Kapalie Uniforms Client Consultation & Sizing Desk
Institutional Sizing & Client Specifications • Est. 1970

Help Center & Specifications

Institutional garment sizing charts, custom fit protocols, fabric care specifications, and client order policies.

<!– SMART MOBILE DEDICATED HERO BANNER (
Kapalie Client Consultation & Sizing Desk
Navigation
Sizing Services • Palace Guttahalli Workshop

Institutional Size & Measurement Guide

Whether garments are for ladies, men, or unisex, measuring each member correctly ensures an authentic made-to-measure fit. All Kapalie patterns factor in positive movement ease for 12-hour kitchen & hotel shifts.

1. Standard Garment Size Charts

Standardized body measurement size sets (XS to 5XL) precision-graded for Indian and international hospitality staff. Each pattern incorporates positive movement ease for long, active 12-hour kitchen and guest-facing shifts.

2. On-Site Tailor Camps

For Bangalore hotels, hospitals, and culinary colleges, our Master Pattern Drafters conduct on-property staff measurement camps for all 50–500 brigade members to guarantee zero sizing errors.

Standard Sizing • Ready Patterns

1. Standard Garment Size Charts

Chef Coats and Jackets (Unisex Sizing) Movement ease of 3″–4″ factored into finished garments
Unisex Size Unisex Chest (Inches) Chest (CM) Centre Back Length (Inches) Length (CM) Standard Roles
XS32″ – 34″81 – 86 cm29″73.5 cmCommis III, Trainee Chef
S36″ – 38″91 – 96 cm30″76.0 cmCommis II, Line Cook
M40″ – 42″101 – 106 cm31″78.5 cmChef de Partie, Line Cook
L44″ – 46″111 – 117 cm31 ½”80.0 cmSous Chef, Senior CDP
XL48″ – 50″122 – 127 cm32″81.0 cmExecutive Chef, Kitchen Manager
2XL52″ – 54″132 – 137 cm33″84.0 cmComfort Plus Size
3XL56″ – 58″142 – 147 cm33″84.0 cmExtended Institutional
4XL60″ – 62″152 – 157 cm33″84.0 cmExtended Institutional
5XL64″ – 66″162 – 168 cm33″84.0 cmExtended Institutional
Individual Precision • Made-to-Measure Comfort

2. Personalized 8-Point Measurement Guide

Every aspect of your garment will be cut and tailored uniquely to your personal pattern to ensure you look your best and feel totally comfortable and confident. You may provide us your measurements by asking a colleague or friend to help measure you using the instructions below. Stand straight and relax.

Fitting Principle: These body measurements do not refer to the actual dimensions of the finished garments. The garments will be cut larger than the body measurements in order to provide for comfortable movement.

01

Neck

Shirts & Collars
Neck Measurement Diagram

Measuring tape should be placed around neck where the centre of the collar would be if you were wearing a shirt, just below the Adam’s apple.

Rule: Snug against skin, but not too tight. Ensure two fingers fit comfortably under tape.
02

Chest

Jackets & Shirts
Chest Measurement Diagram

Stand relaxed with your hands down by your side. The measuring tape should be placed around your body over your shirt, close up under your arms and across your shoulder blades.

Rule: Tape should be held firm against the body, but not too tight. Do not puff chest.
03

Waist

Trousers & Aprons
Waist Measurement Diagram

The measuring tape should be placed around the natural waistline over the shirt holding the tape firm against the body, at your normal trouser waistband height.

Rule: Keep tape level and horizontal without digging into the abdomen.
04

Hips

Trousers & Skirts
Hips Measurement Diagram

Tape should be placed around the fullest part of the hips over the trouser seat and held firm against the body, but not too tight.

Crucial Step: Make sure to empty all pockets (phone, keys, wallet) first!
05

Full Shoulder

Blazers & Coats
Shoulder Diagram 1 Shoulder Diagram 2

Put on a shirt that is a comfortable fit. Take your full shoulder measurement from where the seam on the sleeve joins the back left side to where the seam joins the back right side.

Rule: Measure straight across the back from bone to bone along the natural shoulder arch.
06

Garment Length

Chef Coats & Jackets
Garment Length Diagram

The tape should be held at the front of the body, with the top of the tape placed on the shoulder seam. Measurement should be taken from 1 inch (2.5 cm) above the tip of the thumb.

Rule: Arms hanging naturally at side. 1″ above thumb tip gives optimal coverage and drape.
07

Sleeves

Full & Roll-Up Sleeves
Sleeve Diagram 1 Sleeve Diagram 2

With arm straight and hand in a loose fist, tape should be placed at the shoulder seam and measurement taken from the knuckle of the little finger less 1.5 inches (3.75 cm).

Rule: The 1.5″ deduction prevents cuffs from dragging across wet counters or sinks.
08

Cuff & Wrist

French & Barrel Cuffs
Cuff Measurement Diagram

Measure the actual wrist size. If you wear a medium size watch add 1″ (2.5 cm) to that wrist; for heavier sports or metal watches add 0.5 inch (1.3 cm).

Rule: Allows the watch to slide under the cuff smoothly without button tension.
Direct Workshop Support • Palace Guttahalli

Have Questions About Sizing or Custom Brigade Cuts?

Our Master Pattern Drafters can assist your team with custom tailor-fit measurements, plus sizes beyond 5XL, maternity fits, or dispatching trial fitting kits.

Scroll to Top